Memory Gel
Memory Gel: No gram of excess heat for a good sleep
The cooling Memory Gel foam has the ability to carry away the excess heat generated by the sleeper's body. This shape memory foam adapts to the sleeper's body curves and ideally dampens vibrations.

Products* certified in accordance with European foams safety standards CertiPUR® * Foams produced at
Roshal and Saint Petersburg factories.
The Memory Gel foam has cooling properties due to the presence in the PU structure of a special gel for heat removal.
The presence of air in tiny cells makes Memory Gel viscous. Along with other important advantages of the foam, its structure is homogeneous, velvet-like, smooth and nice to the touch.
Initially the foam was used in the aerospace industry when creating individual seats for astronauts. Today Memory Gel is successfully used in toppers, cushions, as a comfortable mattress layer or one of the combinations in multi-layer solutions.
Advantages
- cooling effect due to the presence of gel in THe pu structure.
- no greenhouse effects.
- physiologically correct level of the sleeper's body support.
- uniformly distributes the pressure across the entire surface of the mattress.
- quickly adapts to match the shape during the sleep position.
- Does not exert response pressure on muscles and joints.
- promotes free blood circulation and oxygen saturation of cells.
- fully hypoallergenic
- everlasting






Grade | Apparent density, kg/m3, GOST 409-77 (ISO 845) | Compressive stress (40% deformation), kPa, GOST 26605-93 (ISO 3386) | Breaking elongation, min %, GOST 29088-91 (ISO 1798) | Tensile stress at break, min KPa, GOST 29088-91 (ISO 1798) | Permanent deformation (22 hrs, 70 ºC, 50%), %, GOST 29089-9 (ISO 1856) | Application area |
---|---|---|---|---|---|---|
LR4509PG |
44,5±1,5 |
1,0±0,3 |
110 |
30 |
1,0-2,0 |
Cooling foam with gel in the PU structure A highly comfortable softening layer of upholstery and mattresses with memory effect sustaining a load of up to 130 kg. Anatomic sleeping pillows. Service life of up to 12 years |
* Physical properties at the table above are based on statistical data from all Foamline factories, when 98% of batches produced matched these ranges. Every plant possess its own product technical conditions, where allowances are wider than mentioned at the table. The customer has the right to put the requirements to the contract that would describe desired properties and allowances. In controversial cases, the product testing methods must be aligned with the methods appointed in technical conditions documents.
Foam color - light blue with blue gel inclusions. Pantone 297U
Related links
Our advantages

Federal District

applied in products and
services

foams in Russia

and representative offices