Energex

Energex

Energex: Maximum comfortable sleep

The unique highly ergonomic and thermal control foam Energex ™ quickly adapts to sleeper's individual needs so that one can have comfortable and sound sleep. The material matches the anatomic curves of the sleeper's body and responds to its heat.

ФомЛайн

Products* certified in accordance with European foams safety standards CertiPUR® * Foams produced at
Roshal and Saint Petersburg factories.

An important distinguishing feature of Energex™ is that it combines both the elastic characteristic of HR-foams and the capability of shape memory materials to ensure isolation from the partner's movements. There is no effect of vitrification at low temperatures – the foam does not harden, and most importantly – it remembers the shape of the sleeper's body. When heated while you are sleeping, the material obtains high elastic properties and the ability to uniformly distribute the pressure. Thanks to this, there is no "drowning" effect – the sleeper can easily roll over the mattress surface without any difficulties. The combination of all these properties helps to relieve tension and relax muscles, provides a healthy and deep sleep in most comfortable conditions.
The open-cell structure allows Energex™ to breathe. Thanks to this advantage, the material is breathable, virtually odorless and enhances the cooling of the sleeper's body for improving sleep quality.

Features:

  • Energex™ has been developed by using cutting-edge Strut Reinforcing Technology (SRT), not aimed at the formation of membranes but on reinforcement of the cell frame, which provides super-long lifespan for the material. This innovative solution provides the usual and HR-foams with high strength characteristics and extremely low compression set.
  • The foam is produced in a wide range of density and stiffness and is used to manufacture a variety of products – from sleeping products to technical products with high strength and damping characteristics.
  • Energex™ is ideal for use in mattresses as a transition piece – between a comfort memory layer and a basic supporting base. Thanks to its layout, it contributes to the optimum distribution of pressure on the surface.
  • In comparison with conventional and HR-foams, Energex ™ is characterized by such an important quality and reliability indicator as a very narrow distribution of density and hardness along the height of the block.
  • Unlike the traditional viscoelastic materials (with memory effect), Energex™ does not become stiff in a cool environment, as it is intended for use in a wide temperature range.

* The residual height loss during the ASTM 90% compression test does not exceed 1.5%.



Eco-friendly
Eco-friendly
Good air permeability
Good air permeability
Hypoallergenic
Hypoallergenic
For orthopedic products
For orthopedic products
Durable
Durable
Certified
Certified
Thermoregulation
Thermoregulation
Cooling effect
Cooling effect
Grade Apparent density, kg/m3, GOST 409-77 (ISO 845) Compressive stress (40% deformation), kPa, GOST 26605-93 (ISO 3386) Breaking elongation, min %, GOST 29088-91 (ISO 1798) Tensile stress at break, min, KPa, GOST 29088-91 (ISO 1798 Permanent deformation (22 hrs, 70 ºC, 50%), %, GOST 29089-9 (ISO 1856) Application area
Energex LR5009 50.0±2.0 0.9±0.3 110 50 0.5-1.5 A highly comfortable softening layer of upholstery and mattresses with memory effect sustaining a load of up to 140 kg. Anatomic sleeping pillows. Service life up to 12 years
Energex LR5013 50.0±2.0 1,3±0,3 110 50 0.5-1.5 A highly comfortable softening layer of upholstery and mattresses with memory effect sustaining a load of up to 140 kg. Anatomic sleeping pillows. Service life up to 12 years

* Physical properties at the table above are based on statistical data from all Foamline factories, when 98% of batches produced matched these ranges. Every plant possess its own product technical conditions, where allowances are wider than mentioned at the table. The customer has the right to put the requirements to the contract that would describe desired properties and allowances. In controversial cases, the product testing methods must be aligned with the methods appointed in technical conditions documents.

Foam color - LR50XX yellow, Pantone 600U

Пантон 2196U

Our advantages

FoamLine
Production facilities in each
Federal District
FoamLine
World experience studied and
applied in products and
services
FoamLine
Widest choise of
foams in Russia
FoamLine
Wide network of dealers
and representative offices
Products About us Documentation Where to buy For partners Contacts